Problem Possible cause Solution
The ap-
pliance
does not
drain the
water:
The drain hose is squashed or kinked. Check the drain hose connection.
The drain filter is clogged. Clean the drain filter.
An option or a programme that ends
with the water still in the tub or a that
eliminates all the spinning phases has
been selected.
Select the draining or spinning pro-
gramme.
The connection of the drain hose is not
correct.
Check the drain hose connection.
The ap-
pliance
switches
off dur-
ing the
washing
phase:
The mains supply has been cut off. Wait for the electricity restore. The
appliance will start again from the
same interrupted washing phase.
The ap-
pliance
spinning
phase
starts
late or
does not
start:
The electronic unbalance detection de-
vice has cut in because the laundry is
not evenly distributed in the drum. The
laundry is redistributed by reverse ro-
tation of the drum. This may happen
several times before the unbalance
disappears and normal spinning can
resume. If, after 10 minutes, the laun-
dry is still not evenly distributed in the
drum, the appliance will not spin.
Redistribute the load manually or
load more laundry and select the spin
programme.
ENGLISH 31
Komentáře k této Příručce