IKEA RENLIGFWM Uživatelský manuál stáhnout pdf (Strana 22)

Problem Possible cause Solution

The delay start has been selected. If the laundry are to be washed

immediately, cancel the delay

start.

The appliance

does not fill:

The water tap is closed The red in-

dicator light of button 4; blinks).

Open the water tap.

The inlet hose is squashed or

kinked (The red indicator light of

button 4 blinks).

Check the inlet hose connection.

The filter in the inlet hose or the in-

let valve filter are blocked (The red

indicator light of button 4 blinks).

Clean the water inlet filters. (See

"Cleaning the water inlet filters"

for more details).

The door is not properly closed

(The red indicator light of button 4

blinks).

Close the door firmly.

The appliance

does not emp-

ty:

The drain hose is squashed or

kinked (The red indicator light of

button 4 blinks).

Check the drain hose connection.

The drain filter is clogged (The red

indicator light of button 4 blinks).

Clean the drain filter.

An option or a programme that

ends with the water still in the tub

or a that eliminates all the spinning

phases has been selected.

Select the draining or spinning

programme.

The appliance

spinning phase

starts late or

does not start:

The electronic unbalance detection

device has cut in because the laun-

dry is not evenly distributed in the

drum. The laundry is redistributed

by reverse rotation of the drum.

This may happen several times be-

fore the unbalance disappears

and normal spinning can resume.

If, after 10 minutes, the laundry is

still not evenly distributed in the

drum, the appliance will not spin.

Redistribute the load manually or

load more laundry and select the

spin programme.

There is water

on the floor:

Too much detergent or unsuitable

detergent (creates too much foam)

has been used.

Reduce the detergent quantity or

use another one.

Check whether there are any leaks

from one of the inlet hose fittings. It

is not always easy to see this as

the water runs down the hose;

check to see if it is damp.

Check the water inlet hose connec-

tion.

ENGLISH 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Komentáře k této Příručce

Žádné komentáře